If energy needs to be saved, there are good ways to do it.
                                                               Government product regulation is not one of them

Tuesday, November 26, 2013

Preliminary Report:
November 25 EU Consultation Forum


Concerning the EU (European Commission) Light Bulb Review and their proposal to alter the regulations as laid out in detail previously:

Yesterday saw the previously mentioned meeting in Brussels of the Consultation Forum involving the Commission, national energy representatives and a few lighting "stakeholder" delegates.
I will expand on anything arising out of this: Suffice to say that while LightingEurope (representing Philips, Osram, GE and other major manufacturers, pre-meeting official statement of their position) and a few other lighting representatives were for the continuation of halogens without time limit, most of the energy agency type people predictably wanted to keep the 2016 ban, with some national representatives (eg Germany, Austria and Italy) wanting at least a delay, in that sense siding with the Commission 2 year delay proposal.
As this was just a consultation, decisions will take some time yet. Final decision on all aspects of the regulation review will be made by April 2014.

The most surprising aspect of the meeting was the focus on clamping down on "rough service" type industrial bulb sales to ordinary consumers - EU light bulb sales inspectors will likely be authorised to patrol the sale outlets of member nations, as already demanded by Energy Commissioner Oettinger for his native Germany. The idea therefore already has strong backing from the boss - and this time nearly all are for it, including the major manufacturers, as a lot of those bulbs are cheap Chinese imports. Thereby also "useful EU job creation" achieved. General applause.
What, the consumer? When were consumers ever important?!




How Regulations are Wrongly Justified 14 points, referenced: Includes why the overall society savings aren't there, and even if they were, why alternative policies are better, including alternative policies that target light bulbs.  
 

Monday, November 25, 2013

EU Commission Light Bulb Ban Review 4:
Rik Gheysens

Update 28 November with extracts and comment section   Original post: 25 November

To continue the reaction to the EU proposals as detailed previously, some other voices, as promised.

Belgian researcher Rik Gheysens has a good bilingual website (version in Dutch here) with plenty of documentation, particularly on fluorescent lighting and problems.
Includes an excellent extensive EU Q and A section, with questions put by EU MPs to the Commission also on the light bulb ban in general, and the answers received.

He has in the last week also covered the light bulb ban review in depth with a critical analysis - which in many ways complements the comments made here in the earlier post, in going more deeply into CFL and mercury issues and also LED environmental problems.


As should be seen below, the press release document (pdf, alt copy). If the view looks messy, try clicking on it to reduce the internal page size etc (seems to work differently in different browsers and their various versions).
As always, downloading the document may work better.






Comment

While much focuses on CFLs and mercury - and for the understandable quoted reasons - it is my belief that the Commission and lighting companies are actively moving away from such lighting: The recent Commission proposal, as linked above and in the document itself, hardly mentions CFLs and the LightingEurope (Philips, Osram, GE etc) statement as previously posted also entirely focuses on the "Ledification" of society.

This is likely also borne out by Commissioner Oettinger's statement, as in the document:

Answer given by Mr Oettinger on behalf of the Commission

The regulation is to be reviewed by 2014.
That will be the time to consider how the EU framework for energy saving lighting should be further developed. In the meantime, the Commission would draw the Honourable Member's attention to the fact that, under Directive 2011/65 (2), the mercury content of Compact Fluorescent Lamps (CFL) in the EU was halved as from January 2013 to a maximum of 2.5 mg (compared to 50 milligrams in cell batteries and 500 milligrams in amalgam dental fillings)

Halving the allowable mercury content makes fluorescent lighting still harder to make with acceptable performance for a given price - which perhaps is the intention, moving towards a "de facto" ban, just as with energy usage standards on incandescents, without actually calling it a "ban".
Personally, while understanding the health, environmental and other arguments against fluorescent lighting, I find it a shame to ban any lighting, and I remain (very) unconvinced that the Commission is doing this out of some bleeding-heart-sympathy-for-consumers.
The greater profitability including self-admitted heavy EU subsidisation (see EU proposal) of LED manufacture has the Commission-Manufacturer tandem working nicely again.


The LED section of the document should therefore also be noted.
Again good points, with plenty of new references not used in this blog before.
As for health, environmental and light quality issues with LEDs, also see the preceding posts in this blog, with illustrations and references.

Some slight editing of the below quote:


Light-emitting diodes

- These lights have a continuous spectrum.

- They have a CRI of only 80-85. Nick Farraway, international sales manager at Soraa, wants a CRI of 95 or greater. But he agrees that it will be difficult and at high costs. [http://ledsmagazine.com/features/10/10/10]

- They have a power factor of 0.5 –0.9 for lamps between 5W and 25W.

- They contain rare earth metals.

- They have a very complex manufacture and the disposal needs special measures.

- They have a spectral imbalance within the blue:
The white light of LEDS has generally a blue peak, which makes it unsuitable to use it at evening. Medical research indicates that blue light is very effective in reducing naturally occurring human melatonin levels. The real impact of light depends on three features: color, intensity and duration.
Melatonin secretion is reduced to 50% after:
  - 403 hours of exposure to an monochromatic RED light at 100 lux
  - 66 min to a candle
  - 39 min to a 60W incandescent bulb
  - 15 min to a 58W daylight fluorescent lamp
  - 13 min to a pure white high-output LED
(Angeles Rol de Lama, e.a., Contaminación lumínica y salud: El lado oscuro de la luz, Dpto. Fisiologia, Universidad de Murcia)

- SCENIHR [ed- the European Commission Scientific Committee on Emerging and Newly Identified Health Risks, link] shows the following opinion:
Despite the beneficial effects of light, there is mounting evidence that suggests that ill-timed exposure to light (light-at-night), possibly through circadian rhythm disruption, may be associated with an increased risk of breast cancer and also cause sleep disorders, gastrointestinal, and cardiovascular disorders, and possibly affective states. Importantly, these effects are directly or indirectly due to light itself, without any specific correlation to a given lighting technology.(SCENIHR, 2012, p. 59)We disagree with this last sentence.

- When dimming a LED,some problems may arise.
(More information in Review study, p. 71-72)

- The lifetime of the LEDs depends on the temperature of the junction and the electric current intensity, without forgetting the quality of production and integration. At present, the definition of the lifetime of a LED and the measuring method are not standardized.
(Effets sanitaires des systèmes d’éclairageutilisant des diodes électroluminescentes (LED), Rapport d'expertise collective, Octobre 2010, p. 40)
The heat is "enemy No. 1" of LEDs, more specifically of white LEDs. LED operation at too high a temperature (and therefore high junction temperature of the semiconductor) has a dramatic effect on efficiency but also on other characteristics and performance of LEDs such as the flux, the spectrum (and thus the color), the polarization voltage, and the life. To take advantage of the interesting properties of LED (flux, efficiency, durability, quality of light emitted), integrators must take into account the heat generated by the LED and qualities of this component to evacuate the heat.(Ibid., p. 207)

- High luminance: (i.e. the high brightness density per surface unit emitted by these very small sources.) LEDs are point sources of light that can be aggregated in lighting units to achieve high luminous flux. Because the emission surfaces of LEDs are highly concentrated point sources, the luminance of each individual source produces very high luminance, at least 1 000 times higher (107cd/m2) than that from a traditional lighting source.

- Stroboscopic effect: Depending on their architecture, the electrical power supplied to LED lighting systems can vary, causing fluctuations in the intensity of the light produced that are more or less perceptible to the naked eye.
(Opinion of the French Agency for food, environmental and occupational health & safety in response to the internally-solicited request entitled "Health effects of lighting systems using light-emitting diodes (LEDs)"19 October 2010)

- The number of EU citizens with light-associated skin disorders that would be affected by exposures from CFLs was estimated in the report to be around 250,000. Clearly, the risk for this group of patients is not limited to CFLs, but includes all light sources with significant UV/blue light emissions. The lack of proper data precludes any improvement of the estimate of the size of the affected group.
(SCENIHR, 2012, p. 11) It is a shame that without further knowledge of the effects of LEDs, the precautionary principle is not applied.

- Because the lemon and primrose yellow are extra sensitive to blue and green, it is risky to illuminate some artworks with LEDs due to the high proportion of blue light. LEDs can damage the paintings of great masters!
(Dutch newspaper De Volkskrant, 4 January 2013)

- The luminous efficiency of LEDs was estimated between 4.2 and 14.9%.
[https://en.wikipedia.org/wiki/Luminous_efficacy#Overall_luminous_efficacy]






How Regulations are Wrongly Justified
14 points, referenced:
Includes why the overall society savings aren't there, and even if they were, why alternative policies are better, including alternative policies that target light bulbs.
 

Sunday, November 24, 2013

EU: Allow Frosted Halogen Bulbs!


Last update 24 November. Original post 22 November

Earlier posts in this series have dealt with the EU review of the light bulb ban, with the details of the EU proposal concerning the future of halogens in the first post.

Recent very good comments on other websites, which I will expand on shortly, include:
• Rik Gheysens with a special press release (pdf, alt copy). This complements earlier posts here in particularly covering the health and environmental effects relating to CFLs and LEDs.
• The Greenwashing Lamps contribution, again with documentation (pdf, alt copy) including well laid out photographic comparisons of using LEDs compared to Halogens, showing the latter in a much better light, as it were.


Clearly the position of this blog is that restrictions on all lighting and indeed other products should be lifted, which are not connected with danger in their use but simply to reduce energy consumption, itself better achieved in other ways.

But the focus at this time is on halogens:
The initial part of the review process deals with the stage 6 proposed ban on remaining halogen replacement bulbs.
As seen from the posts, it seems likely that at least some halogen lighting will be allowed to continue:
But if so, the type of allowed bulbs should be considered.




Specifically, the ban on frosted (non-clear) halogen and similar energy efficient incandescent bulbs should be lifted.
Frosted (matte, pearl) light bulbs and their more opaque (white, opal, soft-tone) varieties generally go by the name "non-clear" bulbs in legal EU terminology:
In comparison with clear, transparent light bulbs the brightness in lumen output and thereby the energy efficiency varies slightly depending on the luminescence of the coating and its thickness, 5-10% either way.
That is, frosted bulbs can be brighter than clear varieties.

The EU research report itself mentions this, by one of the consultants behind it.
Paul van Tichelen replies that we have to make distinction between clear and frosted equivalent.
A clear lamp is always in the lower lumen output.
The lamps we found with above 800 lumen output were for frosted lamps (higher lumen output than clear lamps).
[Note: "(higher lumen output than clear lamps)" albeit emphasized, is the original quote, it is not a comment addition]
Clear LED lamps as referred to more commonly have lower brightness than clear incandescents in comparison with their respective alternatives, but the overall point remains.

The outsider might therefore be reasonably perplexed why the EU - and the EU as sole worldwide jurisdiction - banned frosted lighting in the first place.

Frosted bulbs are, or were, the dominant form of incandescents desired by consumers, especially in Northern Europe (90% of pre-ban incandescent sales, Philips/Osram data). They spread the light more evenly and reduce the point-source glare of clear bulbs.

As always, the irony of popularity making Commission people happier to ban, for supposed greater savings.
No point in banning what people don't want to buy!
Accordingly, in their memorandum to the original 2009 legislation, the Commission stated that those "who want non-clear lamps can buy CFLs and LEDs", presumably feeling that it would help push people to those lighting types, and ignoring all other aspects of why a particular form of lighting is chosen.

But the case here remains a peculiar one.
At least the bans on regular incandescents (and certain TV sets, washing machines, vacuum cleaners, etc)
are straightforward "legitimate" bans in terms of energy efficiency standards.

The ban on frosted bulbs, in this case halogens, is pure Orwellian social engineering, without justification in itself,
and without comparison in any other countries.
Will that make the European Commission think again, on the grounds of (shock, horror) showing some magnanimity to consumers and their choices?
Is the moon a balloon?




Making a "light connection" to add to the above...





As always, when politicians and their bureaucrat cronies come up with petty pointless bans, people will try and get around them.
Hence, in this case, the famous (infamous) euro-condoms, as thought up by lighting designer Ingo Maurer, and as covered in earlier posts on this blog:

Screwing the EU with a Condom
Screwing the EU with a Condom... again



How Regulations are Wrongly Justified
14 points, referenced:
Includes why the overall society savings aren't there, and even if they were, why alternative policies are better, including alternative policies that target light bulbs.
 

Thursday, November 21, 2013

EU Commission Light Bulb Ban Review 3:
LightingEurope Industry Statement


Continuing the series on the EU Light Bulb Ban Review.

Recap
The first post covered the details of the review of the 2009 light bulb regulations that has been started by the EU (European) Commission, and the Commission's proposed 2 year delay on the stage 6 phase out of halogen replacements.

The second post covered the lighting industry position ahead of the EU proposal, mainly that of the major LightingEurope stakeholder (Philips, Osram etc), where they advocated a 3 year delay.
As seen, the representatives were unhappy about cheap lower quality LED imports, hoping for stricter rules in the meantime, rather than being particularly keen to maintain a halogen (let alone standard incandescent) choice for consumers.
My comments criticized this accordingly.

Of course, a few representatives do not necessarily speak for the whole association.
In any case, as per the subsequent released official position of LightingEurope on the issue, they advocate abolition of the stage 6 phase out, and are certainly supportive of halogen lighting alternatives.

An outsider would consider this completely normal:
After all, what manufacturer normally welcomes a ban on what they can or can't make?
Yet, as the history of regulation shows, the major manufacturers have hitherto done just that, on the basis of forced switchovers to more profitable alternatives. A cynical view is that allowing halogens is a magnanimous meaningless gesture to the manufacturer profit bottom line (halogen replacements being far more expensive than regular incandescent bulbs for marginal usage savings, and they were unpopular as a mains voltage choice while regular incandescents still existed). But at least it maintains more choice for consumers.


Should be seen below as a scrollable PDF document:
LightingEurope position on the review of the Stage 6 Requirements of Commission Regulation (EC) No 244/2009

Commenting follows below.






Comment


Conclusions

LightingEurope welcomes Commission’s proposal to postpone the entry into force of the stage 6 requirements. Nevertheless, the LightingEurope recommends the abolishment of Stage 6 requirements, allowing LED technology
to mature further and to grow to a level of market penetration that made it a viably alternative for all EU citizens after having reached an optimal point in terms of monetary and energy savings, without compromising jobs.

Clearly welcome.
Interestingly, as seen LightingEurope is also critical of the Commission suggestion to ban special R7 and G9 halogen types, and to enforce LED compatibility on new fixtures - as covered in the updated first post in this series.



The main argumentation, extracts, inserted comments in italics:

Impact on European Consumers
Each technology produces light with a different distribution pattern.
Halogen lamps are omni-directional point sources,
CFL lamps are omni-directional diffuse sources,
LED chips are directional point sources.

[All lighting forms have their own advantages..indeed]

Luminaires designed for halogen lamps are generally designed for omni-directional point sources.
Other lamp types may or may not function properly in a luminaire in a specific application.
[Note the implied criticism of the EU proposal to enforce LED compatible fixtures]

It is up to the user to determine whether or not a CFL or LED replacement lamp is acceptable.
[An extraordinary statement, for anyone who has read their past communications]

In many applications they are acceptable, but in many other applications they are not.
It needs to be pointed out in this context that learnings from the phase out of incandescent lamps that started in 2009 should be taken into account when determining stage 6 requirements. Upholding these requirements or even postponing them to only 2018 would lead to a factual and unintended phase-out of well established and demanded products on the European lighting market. [Implied objection to EU regulatory rule - again extraordinary - hopefully the authors of this don't get sent to Siberia or whatever the equivalent EU punishment is... and it continues:]
It is to be expected that the consumer’s outrage might be comparable to the one in 2009.
In some applications, a halogen lamp is required for the luminaire to function properly in terms of light emission, quantity of light, light distribution, dimmability, heat management and quality of emission.
If no halogen lamp is available anymore, the only other option is to completely replace the luminaire which would have a severe negative economic impact on the consumer.

Reasonable estimations from industry side indicate that more than 200 million luminaires [fittings etc] in European households would factually become unusable under implementation of stage 6 requirements.
Given this, also a transition period until 2018 would give only five years to European consumers to replace their luminaires.
In the end (costs minus savings) until 2025 consumer would have costs for replacing luminaires of 1.9bn€!
Together with the additional costs €3.1 to €4.6bn caused by a ban as calculated in Table 19 of the review study (p. 40) the overall costs for the keeping stage 6 becomes: €5 to 6.5bn until 2025.

A ban of mains-voltage halogen lamps could have a negative effect on future savings...if consumers are
forced to use CFLi / LED as early as 2016, sockets will be blocked to further improvements of energy efficiency for the next 10/25 years

Savings in 2020 Abolishing stage 6 vs keeping stage 6 and moving to LED: 18.6-9.2= 9,4TWh
Savings in 2020 Abolishing stage 6 vs keeping stage 6 and moving to stage 6 MV-HL: 18.6-14.1= 4,5TWh
Savings until 2060 abolishing stage 6 vs keeping stage 6 and moving to LED: 252,9-218,4= 34,5TWh
Savings until 2060 Abolishing stage 6 vs keeping stage 6 and moving to stage 6 MV-HL: 221,9-218,4= 3,5TWh



They understandably still welcome LED development of course...
LightingEurope is convinced that the increasing “ledification” of light and the related disruptive changes to the entire lighting sector should be seen as opportunities for the European lighting industry.

As a critical aside, to what is obviously otherwise a surprisingly positive statement:
To the extent a push for LEDs might be backed by campaigns, subsidies and maintained existing regulations as on regular incandescents, one might ask if that means a ledification....or leadification of the light bulb sector
Both literally and metaphorically.

Literally in the lead content of LEDs
Department of Chemical Engineering and Materials Science, University of California, USA analysis:
Excessive levels of copper (up to 3892 mg/kg; allowable limit: 2500), Pb (up to 8103 mg/kg; limit: 1000), nickel (up to 4797 mg/kg; limit: 2000), or silver (up to 721 mg/kg; limit: 500), rendering all except low-intensity yellow LEDs hazardous....

Metaphorically, in dulling down a lighting industry, by decreasing rather than increasing choice and competition between different technologies (also by focused subventions on LEDs to the exclusion of alternatives) leaving the LEDs as some sort of sole saviour of humanity.

Bluish LED light forms are already taking over as car headlights, bicycle lamps, torches (flashlights), and at this time, Christmas lights - and not always with a pleasant or even useful light quality.

LED development, in overcoming some of its disadvantages, is welcome and useful - but not to the exclusion of all else.
All lighting has advantages and disadvantages.
It is good and welcome that Philips, Osram and others are beginning to recognize this.
If they haven't quite "seen the light", they have at least shown some "illuminating" development.
 


Finally,
any continued allowance of halogen lighting should include frosted, softer tone (EU term "non-clear") light bulbs, needlessly banned along with all other such incandescent bulbs. They were by far the most popular bulbs before the ban, with less point source glare.
It might be said that stage 6 only deals with already specified halogens. But - as from the EU Commission's own proposal ("extending the stage 6 requirements to halogen lamps with G9 and R7s socket") this does not hold up: the Commission themselves already added clauses, in terms of banning GP and R7s socket bulbs, and in mandating LED compatibility of new fixtures.
So clearly (or non-clearly!) they could move to alter stage 6 requirements to allow such halogen light bulbs.

Even in the underlying research report, the point is made by one of the consultants behind it that such light bulbs are often more - not less - energy efficient than the clear transparent bulbs
Paul van Tichelen replies that we have to make distinction between clear and frosted equivalent.
A clear lamp is always in the lower lumen output.
The lamps we found with above 800 lumen output were for frosted lamps (higher lumen output than clear lamps).
[Note: "(higher lumen output than clear lamps)" albeit emphasized, is the original quote, it is not a comment addition]

Clear LED lamps as referred to more commonly have lower brightness than clear incandescents in comparison with their respective non-clear alternatives, but the overall point remains.
Frosted brightness will depend on luminescence and thickness of coating in being more or less energy efficient. Overall, it is a marginal issue, as also acknowledged by the EU Commission:
The original ban argument that "people can buy CFLs/LEDs if they want non-clear lamps" obviously ignores all the other reasons why particular lighting is chosen.
The EU legislators often say they are not the only ones banning bulbs.
But no other jurisdiction than the EU maintains such a petty specific ban on frosted light bulbs.



How Regulations are Wrongly Justified
14 points, referenced:
Includes why the overall society savings aren't there, and even if they were, why alternative policies are better, including alternative policies that target light bulbs.