If energy needs to be saved, there are good ways to do it.
                                                               Government product regulation is not one of them

Showing posts with label USA::California. Show all posts
Showing posts with label USA::California. Show all posts

Friday, April 11, 2014

Disc Power






It should be clear by now to readers of this blog how incandescent light bulbs are popular, simple, cheap and yes, efficient, in needing few parts to produce bright light, and without supposed energy saving to society (incandescents as the "real green" bulbs).

Unsurprising, then, that people around the world are using workarounds to be able to keep using them. Dumb governments, who make pointless and unpopular laws to suit lobbying profitmakers rather than their citizens, will always find such reactions.

In Europe as in North America, one such avenue has been the use of still legal "rough service" type of bulbs, as well as currently temporarily allowed halogen types.
There are also alternative voltage and current altering ways (in bulbs or externally) that extend incandescent lifetime albeit with some brightness loss.
The various workarounds were most recently covered in the post "USA and Canada Light Bulb Ban: Now and in the Future" from earlier this year.

One innovative way was as seen recently launched in the USA by two bright entrepreneurs, Lisa Elder and Trishah Woolley, using a disc with any ordinary light bulb.
To expand a little more about the California based Power Disc venture, edited extracts from the website, powerdisc.com...




It consists of a nylon reinforced thermoset plastic disc, a solid-state rectifying diode and a foam washer with an adhesive surface. The PowerDiscTM is attached to the base of a light bulb by means of the 3M adhesive coated foam so that the center contact of the bulb is in contact with one end of the diode. When screwed into a light socket, the other end of the diode contacts the center contact of the light socket.

By converting the electricity power used by the bulb from AC to DC, the PowerDisc™ significantly reduces energy consumption up to 42% and also extends the bulb life up to 100 times therefore reducing bulb replacement costs.

In other words, 120 volts of alternating current (AC) are converted to approximately 85 volts direct current (DC).
The light bulb filaments, that actually create the light we see, will burn at a much lower temperature...The degree to which the filament is heated is directly related to the life of the bulb.

Using the formula from the General Electric Incandescent Lamps Booklet (ref. GE #TP-1100R2 5/84) we calculate the life of the bulb with the reduced voltage.... example...



[On the light output reduction issue, making comparisons:]

As it is well known in the industry, all energy efficient light bulbs will have some reduction in lumens (light output), initially up to 30% over the first couple of months. Take note of the packaging for CFL and LED bulbs, they claim they will operate at 70% efficacy - which means they know their bulbs will lose 30% in lumens. Example, the packaging states 1000 lumens but they "guarantee" that the bulb will operate at 700 lumens.

Also the "long life" incandescent and halogen bulbs which operate at 130 volts, when you use it in a 120 volt socket, there is an immediate 25% lumen loss from what is stated on the packaging. Example, the packaging states 1000 lumens but in a 120V socket it is really 750 lumens.

With the PowerDisc there is also an initial lumen loss, the difference is the bulb will maintain that lumen level for the life of the bulb- it won't get dimmer and dimmer over time until it burns out. If it is necessary to maintain similar lumen levels it is recommended to increase the wattage of the light bulb used. The lumen level of the light bulb is dependent upon the manufacturer, clear or frosted and type of light bulb being used. Also keep in mind the lumen level you have upon insertion will be the lumen level for the rest of the life of your bulb until the day it burns out, which means it does not diminish over time, whereas with CFLs and LEDs you get around a 30% lumen loss in the first couple of months, then it slowly decreases until it is very dim. This makes for safety and security issues in certain areas.

If it is important to maintain the visible light level, a higher wattage bulb should be used...but as bulb wattage increases, efficiency in the transformation of electricity to light also increases.



So to begin with the downside, there is a seeming 25-30% brightness loss which means higher electricity costs for a bulb of given brightness, compared with an ordinary simple incandescent bulb.
But... the point is of course is that as such bulbs gradually get banned (and in the USA as in Europe there is talk of controlling the availability of rough service incandescents for ordinary consumers), it allows the extended use of any such bulb without hoarding.
Also, as they say, fluorescents and LEDs dim as they are used, reducing their effective light output too.
Finally the advantage of not having to change bulbs may be useful in some locations.

Overall, good to see this innovative spirit from others who are against the ban - and doing something about it!


How Regulations are Wrongly Justified
14 points, referenced:
Includes why the overall society savings aren't there, and even if they were, why alternative policies are better, including alternative policies that target light bulbs.
 

Tuesday, September 4, 2012

California 95 Watt Bulb Update:
"The Shoe is on the other Foot"


"Update on the Update" made 4 September

Following on from recent posts and the EU (and US) circumvention manufacture and sale of rough service bulbs to the general public...

Bulbs.com sales page:



As covered in the previous post about it, Philips were making 95 Watt bulbs that seemed to circumvent the local sales ban on 100 Watt types, similarly Satco and others...


A PR Web press release end 2011 looked into the matter:
California has always been a pioneer in energy efficiency. California is actually one year ahead of the Federal regulations for lighting regulations geared toward reducing energy consumption, and greenhouse gas emissions. The 100-watt bulbs will no longer be able to be manufactured for the U.S. beginning in January 2012, but they stopped being shipped to California in January 2011.

The lighting industry is reinventing the incandescent bulb to meet these requirements... a new 95 watt incandescent bulb from GE...

The press release, from a lighting sales company, had the standard run through of Halogen, CFL and LED alternatives as well.

My assumption was that in a similar way other 71, 57 and 38 Watt bulbs from different makers, as seen on 1000bulbs.com, bulbs.com etc sales sites were similarly a way to circumvent gradually increasing regulation stringency.

However, from the comment below, and as I checked, turns out the shoe is on the other foot:
California government made a law requiring all hitherto 100W, 75W, 60W, 40W bulbs to be reduced in wattage based on a complex lumen formula, so that they ended up having to be manufactured as 95, 71, 57, 38 Watts from 2008 onward.

The legislative proposals, from various sources:
California’s Title 20 standards effective 1/1/2008 remain in effect until the Federal standards become effective 40W became 38W; 60W -> 57W; 75W->71W; 100W->95W (5% energy savings)
Nevada proposes legislation that calls for all “general purpose lights” sold in the state to be 25 LPW (lumen per watt) by 1/1/2012.
California and Nevada may adopt the Federal standards no more than one year earlier than the Federal effective dates: Phase-in schedule must be maintained – starts in 2011 and ends in 2013 instead of starting in 2012 and ending in 2014
[The Nevada ban seemingly did not occur, and Californians were crossing the border to buy bulbs there, NY Times article Dec 2011]

A good overview was made by GE Lighting.

The relevant California Government regulation (pdf, page 235)
The lamp electrical power input of state-regulated general service incandescent lamps manufactured on or after the effective dates shown in Table K-3, shall be no greater than the applicable values shown in Table K-3...

The table showing that lumen rating 1520-1850 for clear/frosted bulbs had to be made as max 95 Watt bulbs, effectively reducing it from 100 watt - and so on, with more tables for soft white (opal) lamps, and reflector lamps.
All else equal, the wattage reduction reduces brightness too, hence the lumen range with relatively low minimum values.

Or, as colloquially put in a 2008 contemporary blog post
Have you bought a light bulb recently?
My local Walgreen's has a whole aisle full of bulbs. Little appliance bulbs, compact fluorescents that don't work with dimmers, floods, halogens.
What's hard to find is an ordinary, everyday, $0.50 light bulb.
I finally found them, down low by the floor.
Only they weren't normal 75 watt light bulbs.
They were "energy saving" 71 watt light bulbs. Rated at 1075 lumens, compared to 1190 lumens of a real "energy wasting" 75 watt light bulb.

What dumb ass thought this idea up?
Yes, let's save energy by making our lights dimmer! There's a whole range of anemic wattages from GE now: 95W, 71W, 57W, 38W.
Awesome.


So, the manufacturers were not trying to circumvent any bans, rather "following instructions".

But there is nonetheless a slyness in there, effectively cutting normal free trade in a given product and helping local manufacturers and importing distributors to sell 95 Watt bulbs without competition from the common 100 Watt alternatives, and similarly for the other bulbs.
Even as far as lighting standards go, this is a particularly pointless regulation, a petty limiting by a few watts here and there of what bulbs can be made, by a bunch of bureaucrats with seemingly nothing better to do!

Monday, March 26, 2012

More Fun with Philips:
The Philips 95 Watt California Bulb

Update 5 Sep 2012:
Actually, while manufacturers may have profited from regulations they helped to bring about, in the case of the 95 Watt bulbs (similarly 71,57,38 Watt ones) they were just following petty regulations applying from 2008, set down by the California government in reducing bulb wattage (and brightness) a little bit.
For more, see new post of September 4 2012.

#     #     #

Quite a lot about Philips recently here...
their L-Prize LED, their en.lighten campaign involvement with the UN and World Bank, their Phoebus cartel participation, and so on.

They launched a "Philips California bulb" (California approved) as on Bulbs.com of 95W which supposedly circumvents California regulations but really doesn't...

"A former 100-watt light bulb manufactured on or after January 1, 2011 and sold in California will have to use 72 watts or less", California Gov light bulb regulation website, with still stricter standards in 2012.


The Philips California Bulb


Perhaps it just shows the general confusion about light bulb standards...
 

Wednesday, July 20, 2011

Bright Burgess Bulb Coup

 
On the 15th of July, the amendment AO75 (H.Amdt. 678) by Rep. Michael Burgess to Energy Bill H.R.2354 of July 14 2011, was successfully passed in a vote on the floor of the House.

The amendment cuts the funds needed next year to implement and monitor American federal light bulb regulation starting January 2012, which would have seen regular 100 Watt bulbs removed from sale. It is therefore temporary in nature, and does not permanently set back the lighting regulations.

The Energy Bill now passes to the Senate:
Bill content and progress (Govtrack link)



Comment
Following the earlier reported failure to achieve a 2/3 majority in the House,
and rather than seek a simple majority to pass a bill to the Senate unlikely to get sufficient backing (or to be signed by President Obama):
Rep. Michael Burgess, who had earlier introduced his own specific bill regarding mercury-containing lamps and also collaborated with Rep. Burton on the repeal bill, took the interesting step of seeking to amend the H.R.2354 2012 Water and Energy Appropriations Bill instead. This bill finances subsidies wanted also by Democrats, albeit with cuts in these Budget-conscious times, so that such a bill is more likely to pass in the Senate.

Moreover, if the Senate starts tinkering with the small part relating to light bulbs, it lays them open to the same criticism previously levelled at those looking for a repeal of the ban, namely of petty politics in the face of Bigger National Issues
(in context, one might say that it was the original decision to ban some light bulbs which was the petty decision, firstly because of the much more relevant alternative ways to save energy, if required, and secondly in the sense that most people spend at least half of their lives under artificial lighting, and might be allowed a say in the matter)

Taking a wider context,
in light of the current Budget difficulties in the USA, California, and other entities worldwide, their cash-strapped governments that ban Cars, Buildings and Electrical Products based on energy use should seriously consider the taxation alternative:
This would give a large direct Government income that also could help finance cheaper energy saving alternatives, so that consumers both keep choice and are not just hit by taxes.
As seen on the New Electric Politics companion site the need to target products based on energy use can seriously be questioned, and if so should first consider stimulated market competition, but taxation is still preferable to regulations - also for Governments who favor them today.

The issue is covered on that website, and will also be covered here in a following post.
 

Tuesday, July 5, 2011

Saving Energy in America

 
If there is a Problem: Deal with the Problem
From a pro-regulation viewpoint,
if energy use is such a worry, and suggested policies (summarized below) are rejected,
then gasolene, oil, coal, electricity, or products that use a lot of such energy, could simply be taxed to reduce their use, allowing cross-financed subsidies on alternatives to make them cheaper for consumers,
without affecting Federal or State (eg California) Budgets like today




The main message from politicians who are pro-regulation on buildings, cars, refrigerators, light bulbs etc is that "We must save energy and emissions".

Unfortunately, the energy savings from product regulations are much smaller than supposed, from rebound and other general effects, as research has shown
http://ceolas.net/#cc214x

There are also specific reasons why the savings are small,
such that say in the case of light bulbs the savings amount to less than 1% of US (or EU) energy use, as shown with US Dept of Energy and institutional EU statistics references on
http://ceolas.net/#li171x


But even if the savings were there...


The First Consideration:

Arguably there is no particular need,
for Government to impose energy saving measures on paying consumers, unless there is a society energy shortage.
Such a shortage could of course firstly be met by increasing relevant supply (renewable, low emission etc if desired), rather than by forcing citizens to reduce their energy use.
Besides, any actual shortage of oil or coal or gas raises their price and reduces their use anyway - without the need for Government intervention.
Emissions (not just of CO2) can be dealt with directly or by energy substitution.

As regards electricity use,
refrigerators, light bulbs etc don't burn coal and they don't release CO2 gas:
even if the savings figures from regulating such products are accepted, there are still many more relevant (as well as more significant) measures in generation and distribution as well as consumption, to reduce energy use and electricity waste.



If the need is nevertheless felt to impose energy reducing policies,
then increasing free market competition should be the first choice:

Competition between utility companies, industries and businesses means that they themselves strive to keep down their costs - including energy and electricity costs.

Also, competitive pressure means that they are more likely to engage in market research to satisfy consumers in terms of giving good service at a good price
- including that they will provide good energy saving products at lower prices that also save people money in their usage, as has happened throughout history, without Government intervention.




Moving On:

Even if all that was rejected, then taxation is still better than regulation.

I am playing "devil's advocate" here, since I don't support this.
But let's say you are strongly pro-regulation because of the Great Need to Save Energy....

If energy use is such a problem - then simulate a shortage:
Government can simply put an import duty on oil (also for national energy security reasons) or tax oil, gasolene, coal, electricity as required, to raise the price and reduce the use - instead of running round telling citizens what buildings, cars or light bulbs they can or can't buy and use.


"Hey Man, in America we hate taxes!"
"Hey Man, that means the rich can pay and pollute, unlike the poor folk!"


People are not necessarily just "hit by taxes",
since the taxes help fund subsidies for alternative (and low polluting) energy sources - making them cheaper than before.
A bankrupt state like California,
or a near bankrupt country like the USA,
can't just go on with massive upfront costs for "supposed energy savings down the line"
(savings arguably not there anyway, for reasons described on the website)


"Hey Man, still no way that a politician can tax gasolene, or electricity use!"

Well, then one can move on to product taxation alternatives:
While being petty and with similar disadvantages to product regulations,
importantly it keeps choice yet gives Government valuable income at the same time:
Remember that energy demanding products are often cheaper to begin with,
and (as with light bulbs) may be replaced more often, giving high tax revenue
even on decreasing sales.
2 billion annual US sales of relevant light bulbs shows a massive Federal or State Government tax income potential - and that is just light bulbs.

Again, taxing rather than banning certain building construction or certain pick-up trucks or certain electrical products - all which may have usage advantages for consumers -
also allows, as before, for cross-financed energy saving alternatives to be sold cheaper, equilibrating the market
- so "people are not just hit by taxes" in keeping their freedom of choice.

Notice therefore how the talk that
"Markets fail, people don't buy expensive products even if they save money in the long run"
fails twice over:
- Firstly in the market sense, where people do buy expensive alternatives if they are good enough and marketed properly ("Energizer bunny" commercials for batteries, or similarly with washing up liquids etc that "cost more to buy but save money in the long run"),
- Secondly in taxation, a worse alternative, but that also can reduce or cancel the price differences to even out the market.



Even if one accepts "a great need to save energy",
pro-regulation Government politicians therefore lack
not just understanding,
not just imagination,
but also consideration, for the citizens they serve.

As said,
If there is a Problem: Deal with the Problem...